Akrapovic Complete exhaust system

/ Akrapovic / Akrapovic Car / Akrapovic Complete Exhaust Systems / Audi

Product no. UAKS-AU/T/1H

Audi RS6 / RS7 / Performance(C8) 2020-24

Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. The Link pipe set (SS) UAKL-AU/SS/8/1 is a mandatory product to the Evolution Line (Titanium) UAKS-AU/TI/19H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set UAKL-AU/SS/8/1 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

CHF 9'998.00
Recommended sales price incl. VAT

In stock

Your notes / frame no. + type approval number

This item needs homologation
Add homologation document to basket

Quantity

set

Fitting

Audi RS 6 Avant (C8) 2020-24 OPF

Audi RS 7 Sportback (C8) 2020-24 OPF

Audi RS 6 Avant Performance (C8) 2023-24 OPF

Audi RS 7 Sportback Performance (C8) 2023-24 OPF

Technical information

Schematic_UAKS-AUTI19H.pdf

Download PDF

Installation_UAKS-AUTI19H.pdf

Download PDF

Product features

Torque

+17.9Nm / 6150rpm

Mounting Time

450min

Power

+15.8 PS / 6150rpm

Remapping

Weight

-10.4 Kg

Homologation

Yes

Special Features

Linkpipe UAKL-AU/SS/8/1 must be purchased separately.

Made in

Slovenia

Material

Titanium

Yet, there’s no comment or question about this product

Tell us your suggestions and experiences about this product!

support@parts-world.ch

Note: We reserve the right not to publish offensive or inappropriate comments and criticisms on our website and we thank you for your attention. Your contribution will only be published anonymously.

Clever to combine with