The SP Connect CAR BUNDLE is the easiest way to mount your smartphone in
the dashboard area of your car. The SP Connect VENT MOUNT attaches to
your car’s air vents in seconds and allows you to snap your phone onto
its 360° mounting disc. You can position your phone in landscape or
portrait mode or any other angle.
CHF 60.00
Recommended sales price incl. VAT
For orders placed until 12:00 delivery within 24hrs, after 12:00 delivery within 48hrs.
What if my phone model is not listed on the product page?
If you can’t find your phone in the variants shown, then we suggest that
you choose the universal bundle which includes the Universal Interface.
This way the patented SP Connect twist to lock mechanism can be used
with almost any device either directly or on a case of your choice.
Will the Universal Interface (included in the Universal Bundles)
stick to my device?
The 3M adhesive used on the Universal Interface will adhere to many
non-porous flat surfaces such as plastic, glass, metal and painted
surfaces. We have also achieved good results sticking it to silicone
cases. You will need a surface of at least 2.16 x 2.56 inches (55 x
65mm) for the interface to be placed on. Make sure to clean the surface
with an alcohol wipe before use. Stick on the interface to the surface
by placing it on the surface and pressing down firmly for at least 30
seconds. The adhesive mount cannot be re-used, so make sure to position
the adapter carefully.
Tell us your suggestions and experiences about this product!
Note: We reserve the right not to publish offensive or inappropriate comments and criticisms on our website and we thank you for your attention. Your contribution will only be published anonymously.
What if my phone model is not listed on the product page?
If you can’t find your phone in the variants shown, then we suggest that you choose the universal bundle which includes the Universal Interface. This way the patented SP Connect twist to lock mechanism can be used with almost any device either directly or on a case of your choice.
Will the Universal Interface (included in the Universal Bundles) stick to my device?
The 3M adhesive used on the Universal Interface will adhere to many non-porous flat surfaces such as plastic, glass, metal and painted surfaces. We have also achieved good results sticking it to silicone cases. You will need a surface of at least 2.16 x 2.56 inches (55 x 65mm) for the interface to be placed on. Make sure to clean the surface with an alcohol wipe before use. Stick on the interface to the surface by placing it on the surface and pressing down firmly for at least 30 seconds. The adhesive mount cannot be re-used, so make sure to position the adapter carefully.